ULTRASTRESS VISIO GAS, PE100-RC

ULTRASTRESS VISIO GAS pipes are designed for construction of gas pressure piping systems:

  • open trench without bedding and filling according to EN 1610, ENV 1046, EN 12007-2, EN 12327, LVS 421, LVS 418 (not related to ground to be filled around the pipe);
  • by installing in the ground with plough or mill according to EN 1610, ENV 1046, EN 12007-2, EN 12327, LVS 421, LVS 418 (not related to ground to be filled around the pipe);
  • with direct horizontal drilling according to EN 12889, EN 14457;
  • pulling in the previous pipe* according to EN 12889, EN 14457.

Both layers of the pipes are made of PE100-RC.

Products

PIPE MATERIAL OPTIMUM APPLICATION
EVOAQUA VISIO (LVS EN 12201-2:2012) Both layers PE100 Standard pipes for water supply, gas, sewerage pressure piping in open trench with bedding and filling according to  EN 1610, ENV 1046, EN 12007-2, EN 12327, LVS 421, LVS 418
EVOGAS VISIO (LVS EN 1555)
ULTRASTRESS VISIO (LVS EN 12201-2:2012, PAS1075 Type 2) Both layers PE100 - RC

Open trench without bedding and filling according to EN 1610, ENV 1046, EN 12007-2,  EN 12327, LVS 421, LVS 418 (not related to ground to be filled around the pipe)

Installation in the ground with plough or mill according to EN 1610, ENV 1046, EN 12007-2, EN 12327, LVS 421, LVS 418 (not related to ground to be filled around the pipe)

Direct horizontal drilling according to EN 12889, EN 14457

Pulling in the old pipe* according to EN 12889, EN 14457

 

ULTRASTRESS VISIO GAS (LVS EN 1555, PAS1075 Type 2)
ULTRASTRESS PROTECT (LVS EN 12201-2:2012, PAS1075 Type 3) Basic pipe PE100 - RC + 10% sheath of upgraded PP Pulling in the site of the old pipe with destroying the old pipe according to EN 12889, EN 14457
Pulling in the site of the old pipe without destroying the old pipe according to EN 12889, EN 14457
ULTRASTRESS PROTECT GAS (LVS EN 1555, PAS1075 Type 3)

EVOPIPES PIPE CLASSIFICATION ACCORDING TO THE REQUIREMENTS OF PAS* 1075  

* Publicly Available Specification (PAS) serves as addition to the existing system of regulations and directives and relates to polyethylene pipes designed for installation with alternate installation methods.

 

Type 1 — solid-wall pipe of PE100-RC. Dimensions of pipe according to EN 12201, EN 1555. Type 2 — two-layer pipe of PE100-RC, 10% VISIO layer, 90% basic layer. Dimensions of pipe according to EN 12201, EN 1555. Type 3 — solid-wall pipe of PE100-RC with polypropylene (PP) sheath, green lines identifies additional sheath. Dimensions of basic pipe according to EN 12201, EN 1555.