CID 400

Drainage inspection chamber with sediment trap

Connections 110, 160, 200, 250 mm
CID 400


The drainage chamber CID (chamber of inspection for drainage) DN/OD 400 mm with sediment trap and plastic cover for installation outside traffic load impact zones, for example in green areas (courtyards, parks, etc.).

  • Connections can be made at angles: 0°.. 270°
  • Connection DN/OD 110 .. 250 [mm]
  • Sediment trap volume*: 38 [dm³]
    *by default, on request it is possible order different sediment trap volumes (or chambers without one at all)
  • Advantages

    Long service life (>50 years)

    Flexible for movements in soil (no cracking of the chamber)

    Water-tightness

    Resistant to aggressive environment, no corrosion

    The diameter of access hole allows convenient and quick CCTV control and maintenance of sewerage networks

  • Recommended application
    Places outside traffic load impact zones, for example in green areas (courtyards, parks, etc.)
    In agriculture, forestry, in parks, squares and peat fields
    Stadiums and sport complexes
    Landfills (liquid and biogas collection)
  • Chamber components
    CID 400

    Type: with one inlet DN1

    OUT 0° / IN 90° (DN 110-250)

    Additional IN 90° - 270°

    DN 110/160/200

    Type: with two inlets DN1, DN2

    OUT 0° / IN 90° and IN 270° (DN 110-250)

    Additional IN 90° - 270°

    DN 110/160/200

    Type: with three inlets DN1, DN2, DN3

    OUT 0° / IN 90°, IN 180°, IN 270° (DN 110-200)

    Additional IN 90° - 270°

    DN 110/160

  • Technical information
    Installation depth:
    • Minimum instalation depth: 1.0 [m]

    • Maximum installation depth is up to 5.0 [m], if the ground water level is 2.0 [m] from the surface. If the ground water level is 0.0 [m] from the surface, the maximum installation depth is 4.0 [m], according to the requirements of EN 13598-2 standard.

    Chamber cover:
    • Round plastic cover, stationary type, polypropylene (PP), DN 400 [mm], corresponds to the requirements of  EN 13476-3 and EN 124-6 standard

    Chamber shaft and base:
    • Height-adjustment corrugated PP double-wall shaft DN/OD 400 [mm] correspond to the requirements of EN 13476-3 and EN 14802 standards

    • Polypropylene (PP) base of chamber, type CR-CT, DN 400 [mm] correspond to the requirements of EN 13476-3 standard

    How to create additional connections:


    Legend:

    1 - hole saw

    2 - chamber shaft connection seal

    3 - socket adapter/chamber connection

    4 - sealing ring

  • Downloads

    EVODRAIN Catalogue ENG

    Overview of EVOPIPES solutions for drainage and sub-irrigation water system management.

    Download
  Product Code
  Chamber covers
Round plastic cover, stationary type, polypropylene (PP), DN 400 [mm] 820069400ST0000024
  Shaft selection
DN/OD 400 [mm], PP corrugated height-adjustment shaft without connections and with welded on base, h=2 [m] 903060020090020
  Chamber base selection
  Polypropylene (PP) base of chamber, type CR-CT, DN 400 [mm] 813053000000000232
  Accessories


Open

Socket adapter/chamber connection accessory DN 110 [mm] 8090201100000G0200
Socket adapter/chamber connection accessory DN 160 [mm] 8090201600000G0200
Socket adapter/chamber connection accessory DN 200 [mm] 8090202000000G0200

Open
Coupling seal DN 110 [mm] 8092071101G0000036
Coupling seal DN 160 [mm] 8092071602G0000036
Coupling seal DN 200 [mm] 8092072004G0000036
  Hole saw on request

Product pictures are provided for informative purposes only.
Proportions and colours of the original production may differ from the pictures.