CID 600D

Drainage inspection chamber with sediment trap and cast iron cover

Connections 110, 160, 200, 250, 315
CID 600D
CID 600D
CID 600D


The drainage chamber CID (chamber of inspection for drainage) DN/ID 600 [mm] with sediment trap and cast iron D400 class cover.

  • Connections can be made at angles: 0°.. 270°
  • Connection DN/OD 110 .. 315 [mm]
  • Access hole: DN 600 [mm]
  • Sediment trap volume*: 145 [dm³]
    *by default, on request it is possible order different sediment trap volumes (or chambers without one at all)
  • Advantages

    Long service life (>50 years)

    Flexible for movements in soil (no cracking of the chamber)

    Water-tightness

    Resistant to aggressive environment, no corrosion

    The diameter of access hole allows convenient and quick CCTV control and maintenance of sewerage networks

  • Recommended application
    In agriculture, forestry, in parks, squares and peat fields
    Temporary and permanent drainage at construction sites
    Railroad infrastructure territory
    Stadiums and sport complexes
    Road construction (with and without transport load)
    Landfills (liquid and biogas collection)
  • Chamber components
    CID 600D

    Type: with one inlet DN1

    OUT 0° / IN 90° (DN 110-315)

    Additional IN 90° - 270°

    DN 110/160/200/250/315

    Type: with two inlets DN1, DN2

    OUT 0° / IN 90° and IN 270° (DN 110-315)

    Additional IN 90° - 270°

    DN 110/160/200

    Type: with three inlets DN1, DN2, DN3

    OUT 0° / IN 90°, IN 180°, IN 270° (DN 110-315)

    Additional IN 90° - 270°

    DN 110/160/200

  • Technical information
    Installation depth:
    • Minimum instalation depth: 1.0 [m]

    • Maximum installation depth is up to 6.0 [m], if the ground water level is 2.0 [m] from the surface. If the ground water level is 0.0 [m] from the surface, the maximum installation depth is 5.0 [m], according to the requirements of EN 13598-2 standard

    Chamber cover:
    • Stationary type cast iron frame and cover, DN 600/746 [mm], installation class D400 (40t) corresponds to the requirements of EN 124-2 standard

    • Reinforced concrete height adjustmet ring, DN 700/920 [mm], corresponds to the requirements of EN 206, EN 1917 and EN 1917/AC standard

    • Reinforced concrete support ring, DN 700/1060 [mm], corresponds to the requirements of EN 206, EN 1917 and EN 1917/AC standard

    Chamber shaft and base:
    • Height-adjustment corrugated PP double-wall shaft DN/ID 600 [mm] correspond to the requirements of EN 13476-3 and EN 14802 standards

    • Polypropylene (PP) base of chamber, type CR-CT, DN 600 [mm] correspond to the requirements of EN 13476-3 standard

    Subject to ISO/TR 10358 and ISO/TR 7620, elements of the plastic chamber are chemically resistant in pH 2 (acidic environment) and pH 12 (alkaline environment)

    How to create additional connections:


    Legend:

    1 - hole saw
    2 - chamber shaft connection seal
    3 - socket adapter/chamber connection
    4 - sealing ring

  • Drawings

    Standard Drawing CID.600D PDF

    Chamber DN600 with D400 class stationary type cover

    Download
    Standard Drawing CID.600D PDF

    Standard Drawing CID.600D DWG

    DWG file format

    Download
    Standard Drawing CID.600D DWG

CID 600D

Drainage inspection chamber with sediment trap and cast iron cover

Connections 110, 160, 200, 250, 315
Downloads

EVODRAIN Catalogue ENG

Overview of EVOPIPES solutions for drainage and sub-irrigation water system management.

Download

MONODRAIN Catalogue ENG

Drainage pipes for railway construction

Download
  Product Code
  Chamber covers
Stationary type round cast iron frame and cover DN 600/746 [mm] 820228700T30000038
  Conrete components
Reinforced conrete support ring, DN 700/1060 [mm], h=160 [mm] 821072701850000000
Reinforced conrete height adjustment ring, DN 700/920 [mm], h=60 [mm] 8210737025G0000000
  Shaft selection
DN/ID 600 [mm] PP corrugated height-adjustment shaft without connections and with welded on base, h=2 [m] 903060060090020
DN/ID 600 [mm] PP corrugated height-adjustment shaft without connections and with welded on base, h=3 [m] 903060060090030
  Chamber base selection
Polypropylene (PP) base of chamber, type CR-CT, DN 600 [mm], KN 815053000000000231
  Accessories


Open

Socket adapter/chamber connection accessory DN 110 [mm] 8090201100000G0200
Socket adapter/chamber connection accessory DN 160 [mm] 8090201600000G0200
Socket adapter/chamber connection accessory DN 200 [mm] 8090202000000G0200

Open
Coupling seal for GIGAPIPE shaft, DN 110 [mm] 8092071103G0000046
Coupling seal for GIGAPIPE shaft, DN 160 [mm] 8092071606G0000046
Coupling seal for GIGAPIPE shaft, DN 200 [mm] 8092072006G0000046
  Hole saw on request

Product pictures are provided for informative purposes only.
Proportions and colours of the original production may differ from the pictures.

Hello!

We use cookies to help improve your experience of our website. With your consent, statistical and analytical cookies may also be used on this website. If you agree to the use of these additional cookies, please mark your choice: