EVODRAIN HARD HDPE 120°

Multi purpose (MP) drainage pipe, DIN 4262-1

SN8 (kN/m²), DN/OD 63, 75, 90, 110, 125, 160 mm
EVODRAIN HARD HDPE 120°
EVODRAIN HARD HDPE 120°

   

EVODRAIN HARD are rigid drainage pipes made of high-density polyethylene (HDPE) material. Double-wall (R2 type) according to product standard DIN 4262-1- with corrugated (profiled) external wall and smooth internal surface.

  • Nominal ring stiffness class SN8 [kN/m²]
  • Water permeability ≥ 50 [cm2/m]
  • Standard pipe bar length: 6 [m]
  • (MP) type perforation:  120° multipurpose pipe

MP type ≤120° perforated multipurpose pipe whose perforation openings on the pipe surface are located symmetrically to the vertical axis of the pipe at max ≤120° area, but the lower part of the pipe ''flow channel'' is unperforated. It's used for liquid collection and transportation.

  • Advantages

    Excellent impact resistance properties

    Higher resistance against UV radiation

    Chemical and biological inertness

    Environmentally neutral material: PE is 100% recyclable and can be used repeatedly

    Excellent long-term strength properties (service life up to 50 years)

  • Recommended application

    For drainage on plots where the depth of groundwater deposition is less than the drainage norm, i.e. land plots for which, due to high groundwater levels, the topsoil is unable to drain excess moisture in the spring period, as well as due to high groundwater levels, underground engineering structures, roads, etc. are damaged.

    Drainage system EVODRAIN HARD SN8 pipes are applicable for installations in:

    In agriculture, forestry, in parks, squares and peat fields
    Temporary and permanent drainage at construction sites
    Stadiums and sport complexes
    Pavements, pedestrian and bicycle paths
    Landfills (liquid and biogas collection)
    Road construction - with and without traffic load
  • Technical information

    EVODRAIN HARD HDPE pipe is equipped with a double sleeve. The color of the outer surface of the pipe is black (RAL 9004) and the color of the inner surface is white.

    • Produced according to DIN 4262-1
    • Material: high-density polyethylene (HDPE)
    • Ring stiffness SN8 [kN/m²]
    • Available sizes DN/OD 63, 75, 90, 110, 125, 160 [mm]
    • Standard pipe bar length: 6 [m]

    It is possible to achieve a hermetic seal with a pressure rating of ≥0,5 bar (for the coupling area) by adding a rubber sealing ring. Oil-resistant¹ sealing rings are available on order, compliant with the requirements of EN 681-2 p.5.10.

     
    ¹ Compliance is determined by the "Volume change in oil" test according to ISO 1817.

     

    Pipe dimensions
    Parameter DN/OD DN63 DN75 DN90 DN110 DN125 DN160
    Inner Ø [mm] 51.7 62.7 76.2 94.1 106.7 137.6
    Profile height [mm] 5.65 6.15 6.9 7.95 9.15 11.2
    Length [m] 6 6 6 6 6 6
    Perforation parameters
    Perf. length [mm] 13.2 13.3 13.2 18.4 20.4 22.5
    Perf. width [mm] 1.2 1.2 1.4 1.2 1.2 1.4
    Perforations per cross-section 3 3 3 3 3 3
    Permissible rinsing (cleaning) parameters:
    • Maximum pressure: 120 [bar]
    • Flow rate: 80 [l/min]
  • Certificates

    EVODRAIN Certificate ENG

    Certificate of conformity (Bureau Veritas)

    Download
    EVODRAIN Certificate ENG

EVODRAIN HARD HDPE 120°

Multi purpose (MP) drainage pipe, DIN 4262-1

SN8 (kN/m²), DN/OD 63, 75, 90, 110, 125, 160 mm
Downloads

EVODRAIN Catalogue ENG

Overview of EVOPIPES solutions for drainage and sub-irrigation water system management.

Download

EVODRAIN Building rainwater collection systems ENG

Drainage systems

Download

EVODRAIN Certificate ENG

Certificate of conformity (Bureau Veritas)

Download

EVODRAIN HARD HDPE TDS ENG

Product technical datasheet

Download

EVODRAIN FLEX / HARD EPD

Environmental product declaration (EPD HUB)

Download

Calculators

Hydraulic performance of non pressure systems

Flow rate and speed calculations for sewer, rainwater and drainage systems (Colebrook White)

Gravity pipe construction depth

Permissible construction depths and deformation calculations

DN/OD Package [m] Code
EVODRAIN HARD HDPE 120° 6m
63 612 on request
75 612 on request
90 612 on request
110 456 6024111006044F012BC
125 360 on request
160 156 6024116006044F012BC

Product pictures are provided for informative purposes only.
Proportions and colours of the original production may differ from the pictures.

Hello!

We use cookies to help improve your experience of our website. With your consent, statistical and analytical cookies may also be used on this website. If you agree to the use of these additional cookies, please mark your choice: