EVODRAIN HARD PP 360°

Totally perforated (TP) drainage pipe, DIN 4262-1, EN 13476-3

SN8 or SN16 [kN/m²], DN/OD 200, 250, 315, 400 [mm]; DN/ID 300, 400, 500 [mm]
EVODRAIN HARD PP 360°
EVODRAIN HARD PP 360°
EVODRAIN HARD PP 360°
EVODRAIN HARD PP 360°
EVODRAIN HARD PP 360°
EVODRAIN HARD PP 360°
EVODRAIN HARD PP 360°

    
EVODRAIN HARD PP
are hard (non-pliable) drainage pipes from polypropylene (PP) material. According to product standard DIN 4262-1 they feature double-wall construction (R2 type) with profiled (corrugated) external and smooth internal surface.

  • Available sizes:
    • DN/OD 200, 250, 315, 400 [mm]
    • DN/ID 300, 400, 500 [mm]
  • Nominal ring stiffness class SN8 or SN16 [kN/m²]
  • (TP) type perforation- 360° totally perforated pipe with water inlet perforation openings evenly distributed around its ring
  • Advantages
    SN16 class - ideal for places with heavy traffic, such as in the railway infrastructure area
    The product is resistant to low temperatures in range from 0°C to -10 °C
    Products are resistant to exposure to aggressive substances present in sewage and subsoil from pH2 (acidic medium) until pH12 (alkaline medium)
    The products are environment-friendly and recyclable after several decades in operation
    Long operational life - overs 50 years
  • Recommended application

    For drainage on plots where the depth of groundwater deposition is less than the drainage norm, i.e. land plots for which, due to high groundwater levels, the topsoil is unable to drain excess moisture in the spring period, as well as due to high groundwater levels, underground engineering structures, roads, etc. are damaged.

    Drainage system EVODRAIN HARD SN16 pipes are applicable for installations in:

    In agriculture, forestry, in parks, squares and peat fields
    Temporary and permanent drainage at construction sites
    Stadiums and sport complexes
    Pavements, pedestrian and bicycle paths
    Landfills (liquid and biogas collection)
    Road construction - with and without traffic load
    Airport teritory infrastructure
    Harbors and docks infrastructure objects
  • Technical information
    • Produced according to DIN 4262-1, EN 13476-3
    • Available sizes:
      • DN/OD 200, 250, 315, 400 [mm]
      • DN/ID 300, 400, 500 [mm]
    • Ring stiffness: SN8 or SN16 [kN/m²]
    • Ring flexibility: RF30
    • Impact resistance determined at 0°C
    • Standard pipe bar length: 6 [m]
    • Water permeability ≥ 100 [cm2/m]
    • (TP) type perforation: 360° totally perforated pipe with water inlet perforation openings evenly distributed around its ring

    EVODRAIN HARD PP pipe DN/OD 200-400 [mm] and DN/ID 300, 400 [mm] is equipped with welded-on solid PP coupling and oil resistant¹ sealing ring. The supplied sealing ring grants a hermetic seal with a pressure rating of ≥0,5 bar (for the coupling area).

     
    ² The sealing ring is resistant to oil according to the requirements of EN 681-2 p.5.10. Compliance is determined by the "Volume change in oil" test according to ISO 1817.

     

    EVODRAIN HARD PP pipe DN/ID 500 [mm] is equipped with integrated solid PP coupling. The sealing ring (ordered separately) must be mounted on the pipe at the construction site.

    Pipe dimensions
    Parameters DN DN/OD
    200
    DN/OD
    250
    DN/OD
    315
    DN/OD
    400
    DN/ID
    300
    DN/ID
    400
    DN/ID
    500
    Inner Ø [mm] 174.6 215.9 274.1 349.8 298.3 395.8 495
    Profile height [mm] 12.7 17.1 20.5 25.1 20.4 28.0 35.4
    Length [m] 6 6 6 6 6 6 6
    Perforation parameters
    Perf. opening length [mm] 41 54 60 38 60 38 50
    Perf. opening width [mm] 2.0 2.0 2.0 2.0 2.0 2.0 2.0
    Perforations per crossection 3 3 3 6 3 6 6
    Permissible rinsing (cleaning) parameters:
    • Maximum pressure: 120 [bar]
    • Flow rate: 80 [l/min]
  • Certificates

    EVODRAIN Certificate ENG

    Certificate of conformity (Bureau Veritas)

    Download
    EVODRAIN Certificate ENG

EVODRAIN HARD PP 360°

Totally perforated (TP) drainage pipe, DIN 4262-1, EN 13476-3

SN8 or SN16 [kN/m²], DN/OD 200, 250, 315, 400 [mm]; DN/ID 300, 400, 500 [mm]
Downloads

EVODRAIN Catalogue ENG

Overview of EVOPIPES solutions for drainage and sub-irrigation water system management.

Download

MONODRAIN Catalogue ENG

Drainage pipes for railway construction

Download

EVODRAIN Certificate ENG

Certificate of conformity (Bureau Veritas)

Download

Sealing rings oil resistance EN 681-2:2006-11 Declaration

Declaration of conformity

Download

EVODRAIN HARD PP SN8 DN/OD system TDS ENG

Product technical datasheet

Download

EVODRAIN HARD PP DN/ID system TDS ENG

Product technical datasheet

Download

Calculators

Hydraulic performance of non pressure systems

Flow rate and speed calculations for sewer, rainwater and drainage systems (Colebrook White)

Gravity pipe construction depth

Permissible construction depths and deformation calculations

DN Pack [m] SN [kN/m²] Code
DN/OD series pipes
200 192 8 6024120006000F0853C
16 6024120006000G0853C
250 48 8 6024125006000F0853C
16 on request
315 36 8 6024131506000F0853C
16 on request
400 18 8 6024140006000F0853C
16 on request
DN Pack [m] SN [kN/m²] Code
DN/ID series pipes
300 36 8 on request
16 on request
400 12 8 on request
16 on request
500 12 8 60241I0506014F085CC
16 on request
DN/ID pipe sealing rings
500 1 - 809025500000000096

Product pictures are provided for informative purposes only.
Proportions and colours of the original production may differ from the pictures.

Hello!

We use cookies to help improve your experience of our website. With your consent, statistical and analytical cookies may also be used on this website. If you agree to the use of these additional cookies, please mark your choice: