T3/615

Support ring

DN 615/950 mm
T3/615
T3/615

Polymer support ring for construction of self-leveling and stationary type covers.

  • Advantages

    Stable and long-lasting foundation for cover.

    The smaller weight of the polymer elements ensures easy and quick construction process.

    Can be installed in any weather conditions, D400 class durability immediately after construction.

    High resistance against environmental influences.
  • Construction
    • Chamber cover finial elements made from polymer are suitable for:
      • all the EVOPIPES chambers;
      • reconstruction of chamber covers of reinforced concrete chambers.
    When assembling polymer chamber cover elements, one above the other, use silicone mastic, Ø 3-5 mm in two strips, on the surface of the polymer element!

    During the assembly process the following remarks must be taken into account:

    • Do not assemble the polymer surface finial elements on an unprepared ground, uneven, unlevelled, and unrepaired surface supporting the adjustment elements and in case of relief elements - on an uncompacted ground or substructure;
    • Do not use cement-based mortar between polymer elements in the finial structure and between polymer and cast-iron elements of chamber finial;
    • Do not make high adjustment based only on compensation rings with small dimensions (e.g. 21 cm adjustment made using 10 pcs of 15 mm rings and 2 pcs of 3 cm rings), as the possibility of height problem occurring during the operation increases the finial costs without any justification;
    • Make sure that that frame of chamber cover is perfectly placed on the polymer elements.

  • Technical information

    • Compressive strength

    Class D400 (>500 kN)

    • Weight (T3/615)

    53,6 kg

    • Specific weight

    1,45 kg/dm3

    • Material

    Composition of termoplastic polymers (PVC, PE and PEX)

    • Hardness

    46 sec. Shor'e D

    • Absorption capacity

    <0,02%

    • Mechanical loss factor

    ni<=0,33

    • Resistance to freezing in water

    F150(-2%)

    • Frost resistance in 2% NaCl

    F50(-2%)

    • Heat resistance

    from-30 to +60°C

    • Chemical resistance

    Highly resistant to acids, alkaline substances, salts, fats, oils and solvents

    • Thermal resistance during assembly (in contact with asphalt)

    Short, about 2 hours to 170°C

T3/615

Support ring

DN 615/950 mm
Downloads

Polymer rings - Declaration of performance

Height adjustment rings, support rings, adapters and accessories

Download
  Product Code
  Support rings
Polymer support ring T3/615, h=180 mm. 822091832F50000000
  Height-adjustment ring
Height-adjustment ring T1R/625, h=40 mm. 822073835N20000000
Height-adjustment ring T1R/625, h=60 mm. 822073835N40000000
Height-adjustment ring T1R/625, h=80 mm. 822073835N50000000
Height-adjustment ring T1R/625, h=100 mm. 822073835320000000
Height-adjustment ring T1R/625, h=120 mm. 822073835N60000000
  Adapter
Polymer adapter TXS/635/80N for self-leveling DN 600 mm chamber cover, h=80 mm. 822250836G90000000

Product pictures are provided for informative purposes only.
Proportions and colours of the original production may differ from the pictures.

Hello!

We use cookies to help improve your experience of our website. With your consent, statistical and analytical cookies may also be used on this website. If you agree to the use of these additional cookies, please mark your choice: