Energy-absorbing chambers DN 1000.625
Utility wastewater and stormwater energy-absorbing chamber
Outlet: DN/OD 200, 250, 315, 400 mm; Inlet: DN/OD 160-355 mm

Energy-absorbing chambers DN 1000 for utility wastewater and stormwater systems. Made from polyethylene (PE) material with D400 class self leveling or stationary type cover.
- Connections:
- Inlet DN/OD 160 .. 355 [mm]
- Outlet DN/OD 200 .. 400 [mm]
- Cover: D400 class (40t), RAL GZ-692
- Access diameter 625 [mm]
-
Advantages
No stagnant water in the chamber
Resistant to aggressive environment, no corrosion
Long service life (>50 years)
Flexibile for movements in soil (no cracking of the manhole)
Water-tightness > 0.5 bar, watertight materials
The diameter of access hole allows convenient and quick maintenance of sewerage networks
-
Recommended application
Intended for utility sewerage and rainwater pressure systems:
- SDR17, PE80 class EN 12201-2+A1 pipes with nominal pressure class PN8 [bar];
- SDR17, PE100 class EN 12201-2+A1 pipes with nominal pressure class PN10 [bar];
- SDR17, PE100-RC class EN 12201-2+A1, PAS 1075 pipe types- 1, 2, 3 with nominal pressure class PN10 bar.
Chamber installation according to: EN 1610, CEN/TR 1046
Construction work related to chamber cover and upper part of chamber shall be performed in accordance with road or territory manager’s issued technical regulations and sewer system operator (water management service provider’s) requirements.
-
Chamber components
- OUT 0° DN 200 - IN R/L° DN 160
- OUT 0° DN 250 - IN R/L° DN 180, 200
- OUT 0° DN 315 - IN R/L° DN 225, 250, 280
- OUT 0° DN 400 - IN R/L° DN 315, 355
Note: On demand it is possible to manufacture inlet “IN(R/L)°” with flange connection
-
Technical information
Installation depth:
- Minimum instalation depth: 1,20 [m]
- Maximum installation depth is up to 6.0 [m], if the ground water level is 2.0 [m] from the surface. If the ground water level is 0.0 [m] from the surface, the maximum installation depth is 5.0 [m], according to the requirements of EN 13598-2 standard
Chamber cover:
- Stationary type cast iron frame and cover, DN 600/746 [mm], installation class D400 (40t) corresponds to the requirements of EN 124-2 and RAL GZ-692 standard
- Self-leveling type cast iron frame and cover, DN 700 [mm], installation class D400 (40t) corresponds to the requirements of EN 124-2 and RAL GZ-692 standard
- Cast iron shell ring adapter corresponds to the requirements of EN 124-2 standard
- Reinforced concrete height adjustmet ring, DN 665/1000 [mm], corresponds to the requirements of EN 206, EN 1917 and EN 1917/AC standard
- Reinforced concrete support ring, DN 665/1060 [mm], corresponds to the requirements of EN 206, EN 1917 and EN 1917/AC standard
Chamber shaft and base:
- Polyethylene (PE) eccentric cone, DN 1000/625, h=750/1000 [mm], corresponds to the requirements of EN 14802
- Polyethylene (PE) chamber shaft, DN 1000, h=500/1000 [mm], corresponds to the requirements of EN 14802
- Polyethylene (PE) chamber base, DN 1000, h=700/1000 [mm], corresponds to the requirements of EN 13598-2, EN 476
- To ensure the water-tightness of the chamber, the connecting elements are connected with rubber sealing rings DN 1000 [mm] corresponding to the requirements of EN 681-1 and EN 1277 standards. The chamber must ensure the maximum pressure of 0.5 [bar]
According to the requirements of EN 681-1 and EN 1277 standards, rubber sealing rings of chambers have to ensure water-tightness of connections at water pressure of 0.5 [bar]
-
Downloads
Product | Code | |
---|---|---|
Chamber covers | ||
![]() |
Self-leveling round cast iron frame and cover, DN 700 [mm] | on request |
![]() |
Stationary type round cast iron frame and cover, DN 600/746 [mm] | on request |
Odour filter selection | ||
![]() |
Sewer air odour filter | 820230000000000000 |
Shell ring adapter | ||
![]() |
Cast iron shell ring adapter | 820215601ST7300038 |
Conrete components | ||
![]() |
Reinforced conrete support ring, DN 665/1060 [mm], h=160 [mm] | 821072666850000000 |
![]() |
Reinforced conrete height adjustment ring, DN 665/1000 [mm], h=60 [mm] | 821073T09840000000 |
Cone selection | ||
![]() |
Polyethylene ring type cone, h=750 [mm], DN 1000/625 [mm] | 817091106440000134 |
Polyethylene ring type cone, h=1000 [mm], DN 1000/625 [mm] | on request | |
Shaft selection | ||
![]() |
Polyethylene ring type shaft, h=500 [mm] | 817024000400000134 |
Polyethylene ring type shaft, h=1000 [mm] | on request | |
Sealing ring | ||
![]() |
Sealing ring, DN 1000 [mm] | 817026T01000000034 |
Chamber base selection | ||
![]() |
PE Spherical energy-absorbing chamber base, DN 1000 [mm], h=1000 [mm] | 817054000460000134 |
PE Spherical energy-absorbing chamber base, DN 1000 [mm], h=700 [mm] | on request |
Product pictures are provided for informative purposes only.
Proportions and colours of the original production may differ from the pictures.