Gullies DN 400.315

With telescopic pipe and round or square grate D400

Connections DN/OD 110, 160, 200, 250, 315 mm
Gullies DN 400.315
Gullies DN 400.315


Gullies DN 400 [mm] with sediment trap, telescopic pipe and D400 class cast iron cover. 

  • Connection DN/OD 110 .. 315 [mm]
  • Telescopic pipe: DN 315 [mm]
  • Cover: D400 class (40t)
  • Sediment trap volume*: 67 [dm³]
    *by default, on request it is possible order different sediment trap volumes (or without one at all)
  • Advantages

    Long service life (>50 years)

    Flexible for movements in soil (no cracking of the chamber)

    Water-tightness > 0.5 bar, watertight materials

    Resistant to aggressive environment, no corrosion

    The diameter of access hole allows convenient and quick maintenance of sewerage networks

  • Recommended application
    Yards of multi-storey dwellings
    Parking places and vehicle storage areas
    Pavements, pedestrian and bicycle paths
    Stadiums and sport complexes
    Road construction (with and without transport load)
  • Chamber components
    Gullies DN 400.315
    Connections OUT 0°
    DN/OD [mm] 110 / 160 / 200 / 250 / 315*
    *connections in gullies from DN/OD 110 to 200 [mm] may be formed by use of coupling seal, but connections in gullies above DN/OD 200 [mm] should be formed by built-in connection cup
  • Technical information
    Installation depth:
    • Minimum instalation depth: 1.0 [m]
    • Maximum instalation depth: 5.0 [m]
    Chamber cover:
    • Round cast iron frame and grate, DN 315 [mm], installation class D400 (40t) corresponds to the requirements of EN 124 standard
    • Square cast iron frame and grate, 415x415 [mm], installation class D400 (40t) corresponds to the requirements of EN 124 standard
    • Square cast iron frame and round grate, 385x385 [mm], installation class D400 (40t) corresponds to the requirements of EN 124 standard
    Telescopic section:
    • Telescopic pipes:
      • PE smooth-wall pipe DN/OD 315 [mm], height 0.6 [m], corresponds to the requirements of EN 12201-2 and EN 14802 standards
      • PP smooth-wall pipe DN/OD 315 [mm], height 0.6 [m], corresponds to the requirements of EN 13476-2 standard
    • Rubber cuff DN 400/315 and rubber sealing ring DN 400 [mm] correspond to the requirements of EN 681-1/A3 and EN 1277 standards
    Chamber shaft and base:
    • Height-adjustment corrugated PP double-wall shaft DN/OD 400 [mm] correspond to the requirements of EN 13476-3 and EN 14802 standards
    • Polypropylene (PP) base of gully, type CR-CT, DN 400 [mm] correspond to the requirements of EN 13476-3 standard

    Subject to ISO/TR 10358 and ISO/TR 7620, elements of the plastic chamber, as well as rubber sealing elements (rubber sealing rings and cuffs) are chemically resistant in pH 2 (acidic environment) and pH 12 (alkaline environment)

  • Certificates

    DN 400.315 Road gullies Certificate ENG (INSTA-CERT)

    Conformity mark certificate (INSTA-CERT)

    Download
    DN 400.315 Road gullies Certificate ENG (INSTA-CERT)
  • Downloads

    RIGID MULTI & MONO Catalogue ENG

    Gravity sewer systems for utility sewage and rainwater

    Download

    EVOSAN, EVOSAN RF and EVORAIN Catalogue ENG

    EVOSAN rain and waste water system catalogue

    Download

    DN 400.315 Road gullies Certificate ENG (INSTA-CERT)

    Conformity mark certificate (INSTA-CERT)

    Download
  Product Code
  Chamber covers
Round cast iron chamber cover (frame with grate), 315 [mm], D400 820211315SL7300024
Square cast iron chamber cover (frame with grate), 415x415 [mm], D400 820212315SL7300024
Square cast iron chamber cover (frame with round grate), 385x385 [mm], D400 820213315SL730001A
  Telescopic pipe selection
PE smooth-wall telescopic pipe, DN/OD 315 [mm], height 0.6 [m] on request
PP smooth-wall telescopic pipe DN/OD 315 [mm], height 0.6 [m] 3124031506000000050
  Telescopic connection cuff
Rubber cuff DN 400/315 813208405000000048
  Shaft selection
DN/OD 400 [mm], PP corrugated height-adjustment shaft without connections and with welded on base, h=2 [m] 903060020090020
  Chamber base selection
  Polypropylene (PP) base of gully, type CR-CT, DN 400 [mm] 813053000000000232
  Accessories


Open

Socket adapter/chamber connection accessory DN 110 [mm] 8090201100000G0200
Socket adapter/chamber connection accessory DN 160 [mm] 8090201600000G0200
Socket adapter/chamber connection accessory DN 200 [mm] 8090202000000G0200

Open
Coupling seal DN 110 [mm] 8092071101G0000036
Coupling seal DN 160 [mm] 8092071602G0000036
Coupling seal DN 200 [mm] 8092072004G0000036
  Hole saw on request

Product pictures are provided for informative purposes only.
Proportions and colours of the original production may differ from the pictures.